Rotor
EOL Rotor
On the autonomous fully automated EOL (function test) the geometrical characteristics, electrical parameters and the polarity of the magnetic poles of rotors are tested. A wide range of rotor sizes can be tested by equipping…
Highlights
- Short cycle times through parallelisation of measuring tasks and high acceleration rates
- Conversion to 15 different rotor holders possible
- Tactile measurement of run-out and diameter at freely selectable measuring points
- Axial non-contact laser measuring system with very high resolution, and automatic positioning at any point from the central axis (required measuring spot approx. 1mm)
- Hiding of interfering contours in the measuring range
- Graphical evaluations with optimisation of the measurement values.
- Fully automated calibration when using a measurement reference part
- Integration of customer-specific evaluation algorithms
- High-precision speeds through stable servo motor control
- Low tension load due to wraparound belt with a large belt running surface
Technical data
- Voltage: 400 – 480 V / 50-60Hz
- Compressed air: 6 bar
- Acceleration drive: approx. 500 RPM/s
- Rotor weight: approx. 45kg
- Rotor length: approx. 500mm
- Rotor diameter: approx. 250mm
- Dimensions (L x W): approx. 2250mm x 1080mm
Do you have any questions? Contact us.
Further references
Solutions that speak for themselves
